Quality

Precision equipment and inspection

  • Home
  • Ceramic Products
  • Ceramic Handling Arms

Ceramic Handling Arms

Precision ceramic forks for wafer and panel handling

SHENTIN manufactures precision ceramic handling arms to drawing for wafer and display panel equipment. Material, design and machining options can be reviewed against your load, speed and temperature requirements.

Ceramic Handling Arm Gallery

Why Consider Ceramic Handling Arms?

  • Rigidity: assess deflection and positioning requirements against geometry and load.
  • Weight: review material and structural design to manage end-effector weight and equipment load.
  • Dimensional stability: evaluate thermal movement against material grade, temperature and thermal cycles.

Machining and Design Review

  • Internal vacuum channels: one-piece or bonded designs can be evaluated against your requirements.
  • Surface grinding: the original page lists flatness within 0.005 mm as a reference; actual capability depends on size, material, drawing and measurement method.
  • Custom geometry: dual-fork, thin-fork and PEEK contact-point designs can be reviewed.

Material Selection: Alumina and Silicon Carbide

Property 99.5% Alumina Silicon Carbide
Young’s modulus (reference) 370 GPa 410 GPa
Density (reference) 3.9 g/cm³ 3.1 g/cm³
Relative cost Generally lower Generally higher
Application considerations General wafer handling and insulation Lighter-weight, high-temperature or large-format handling

Figures are reference values from the original page. Actual properties, cost and suitability depend on material grade and operating conditions.

Frequently Asked Questions

A drawing can be reviewed. Ceramics are brittle, so corners, loads and assembly features may require design changes.

The original page indicates parts over 1,000 mm can be evaluated. Actual capability depends on the drawing, material and machining conditions.

Fractured ceramic generally requires replacement; the appropriate action depends on the damage and application requirements.

Discuss Your Ceramic Handling Arm

Share your CAD drawing, handling dimensions, load and operating conditions with SHENTIN for a material and design review.