Service

Ceramic components for global applications

  • Home
  • Materials
  • Silicon Nitride Ceramic Machining (Si₃N₄)

Silicon Nitride Ceramic Machining (Si₃N₄)

Thermal shock resistance, low weight and high strength

Silicon nitride ceramic components

Silicon nitride is a structural ceramic valued for its thermal shock resistance, low density and strength. It can be considered for high-speed, high-temperature and thermally varying applications. SHENTIN reviews machining options based on your drawings, material grade and operating conditions.

Key Material Characteristics

  • Thermal shock resistance: low thermal expansion can help accommodate temperature changes; performance depends on the thermal cycle and application.
  • Low weight and strength: lower density than some metals supports lightweight handling and structural designs.
  • Wear and friction characteristics: suitable for evaluation in bearings, positioning components and other moving contacts.

Typical Applications

  • High-speed rotating parts: ceramic bearing balls and rotors.
  • Semiconductor and automation equipment: wafer handling arms, support pins and positioning parts.
  • Metal casting: riser and protection tubes, subject to review of the molten metal and operating conditions.
  • Welding fixtures: locating pins and heat-resistant components.

Material Selection and Machining Review

Properties and machining feasibility vary by material grade, part geometry, temperature and environment. Share your drawings and operating conditions for assessment.

Reference Ceramic Material Properties

Property / material Alumina Zirconia SiC Si₃N₄ AlN
Density g/cm³ 3.9 6 3.2 3.3 3.2
Thermal conductivity W/(m·K) 28 1.8 126 27 160
Thermal expansion 10⁻⁶/°C 8 10.1 4 2.3 4.4
Microhardness kgf/mm² 1600 1400 2300 1500 1200
Specific heat J/(kg·K) 800 400 700 700 730
Elastic modulus GPa 370 200 410 310 340
Tensile strength MPa 262 700 400 524 400
Compressive strength MPa 2600 1850 3900 2500 2070
Flexural strength MPa 380 690 550 780 360
Fracture toughness MPa·m½ 3.6 9.5 4.6 7.7 2.6
Poisson’s ratio 0.23 0.26 0.19 0.24 0.25
Melting point °C 2053 2700 2700 1900 2400

Values are reference figures from the original page, not guaranteed specifications. Properties vary by grade, processing, batch, test method and operating conditions. Use supplier specifications and inspection data for material selection and acceptance.

Discuss Your Silicon Nitride Component

Send SHENTIN your drawings, operating temperature, chemical exposure and loading conditions for a material and machining review.