- Machining Services
- Ceramic Products
- Materials
- Industries
- Our Strengths
- About SHENTIN
- Contact
Service
Ceramic components for global applications
About Us
Reference comparison of five industrial ceramics
Select a ceramic material based on your application’s wear, insulation, thermal and strength requirements. The table below summarizes reference figures from the original page for preliminary comparison.
Illustrative precision ceramic components.
| Property / material | Alumina | Zirconia | SiC | Si₃N₄ | AlN |
|---|---|---|---|---|---|
| Density g/cm³ | 3.9 | 6 | 3.2 | 3.3 | 3.2 |
| Thermal conductivity W/(m·K) | 28 | 1.8 | 126 | 27 | 160 |
| Thermal expansion 10⁻⁶/°C | 8 | 10.1 | 4 | 2.3 | 4.4 |
| Microhardness kgf/mm² | 1600 | 1400 | 2300 | 1500 | 1200 |
| Specific heat J/(kg·K) | 800 | 400 | 700 | 700 | 730 |
| Elastic modulus GPa | 370 | 200 | 410 | 310 | 340 |
| Tensile strength MPa | 262 | 700 | 400 | 524 | 400 |
| Compressive strength MPa | 2600 | 1850 | 3900 | 2500 | 2070 |
| Flexural strength MPa | 380 | 690 | 550 | 780 | 360 |
| Fracture toughness MPa·m½ | 3.6 | 9.5 | 4.6 | 7.7 | 2.6 |
| Poisson’s ratio | 0.23 | 0.26 | 0.19 | 0.24 | 0.25 |
| Melting point °C | 2053 | 2700 | 2700 | 1900 | 2400 |
Values are reference figures from the original page, not guaranteed specifications. Properties vary by grade, processing, batch, test method and operating conditions. Use supplier specifications and inspection data for material selection and acceptance.
Actual performance varies with purity, manufacturing process, batch, test method and operating environment. Use supplier data, test reports and customer requirements to confirm specifications and acceptance.
Share your drawing, operating temperature, chemical exposure and loading conditions with SHENTIN to review material and machining options.