Service

Ceramic components for global applications

  • Home
  • Materials
  • Zirconia Ceramic Machining (ZrO₂)

Zirconia Ceramic Machining (ZrO₂)

High-toughness zirconia and precision ceramic components

Zirconia ceramic components

Zirconia, particularly yttria-stabilized zirconia (Y-TZP), offers high fracture toughness and wear resistance. SHENTIN evaluates precision machining options based on your drawings, material grade and operating conditions.

Precision Machining Services

  • Grinding and polishing: Review dimensional and surface requirements for sliding contacts, plungers and bearing components.
  • Edge and geometry machining: Assess precision grinding based on part geometry and material characteristics.

Typical Applications

  • Fluid control and pumps: wear-resistant plungers, valve balls and sealing components.
  • Automation and positioning: locating pins, guides and precision fixtures.
  • Industrial cutting: slitting blades and cutting components.
  • Grinding: zirconia media and wear-resistant components.

Material Characteristics

Zirconia’s toughness and thermal expansion can help inform material selection. Strength, wear performance and metal fit depend on grade, design and temperature.

Reference Ceramic Material Properties

Property / material Alumina Zirconia SiC Si₃N₄ AlN
Density g/cm³ 3.9 6 3.2 3.3 3.2
Thermal conductivity W/(m·K) 28 1.8 126 27 160
Thermal expansion 10⁻⁶/°C 8 10.1 4 2.3 4.4
Microhardness kgf/mm² 1600 1400 2300 1500 1200
Specific heat J/(kg·K) 800 400 700 700 730
Elastic modulus GPa 370 200 410 310 340
Tensile strength MPa 262 700 400 524 400
Compressive strength MPa 2600 1850 3900 2500 2070
Flexural strength MPa 380 690 550 780 360
Fracture toughness MPa·m½ 3.6 9.5 4.6 7.7 2.6
Poisson’s ratio 0.23 0.26 0.19 0.24 0.25
Melting point °C 2053 2700 2700 1900 2400

Values are reference figures from the original page, not guaranteed specifications. Properties vary by grade, processing, batch, test method and operating conditions. Use supplier specifications and inspection data for material selection and acceptance.

Discuss Your Zirconia Component

Send SHENTIN your drawings, operating temperature, chemical exposure and loading conditions for a material and machining review.