Service

Ceramic components for global applications

  • Home
  • Materials
  • Silicon Carbide Ceramic Machining (SiC)

Silicon Carbide Ceramic Machining (SiC)

High hardness, heat resistance and chemical resistance

Silicon carbide ceramic components

Silicon carbide combines high hardness, thermal conductivity and heat resistance. It can be considered for semiconductor equipment, fluid machinery and wear-intensive applications. SHENTIN reviews machining options based on your drawings, material grade and operating conditions.

Silicon Carbide Material Options

  • Pressureless-sintered silicon carbide (SSiC): a dense, hard material that can be considered for mechanical seals and wear-resistant nozzles.
  • Chemical vapor deposited silicon carbide (CVD SiC): can be evaluated for semiconductor components; purity and cleanliness must be confirmed against material certificates and customer requirements.

Machining Review

  • Fine holes and internal channels: assess suitable machining methods based on electrical conductivity, geometry and requirements.
  • Threads and precision features: review feasibility against the drawing and part conditions.
  • Lightweight structures: assess machining for wafer carriers and handling components based on the design.

Typical Applications

  • Semiconductor processing: focus rings and wafer carriers.
  • Fluid machinery and sealing: mechanical seals and wear parts for chemical pumps.
  • Optical equipment: structural components where stiffness and thermal stability matter.
  • High-temperature processing: burner nozzles, furnace tubes and equipment components.

Material Selection and Machining Review

Wear resistance, chemical compatibility and high-temperature performance depend on material grade, medium, temperature and environment. Share your drawings and operating conditions for assessment.

Reference Ceramic Material Properties

Property / material Alumina Zirconia SiC Si₃N₄ AlN
Density g/cm³ 3.9 6 3.2 3.3 3.2
Thermal conductivity W/(m·K) 28 1.8 126 27 160
Thermal expansion 10⁻⁶/°C 8 10.1 4 2.3 4.4
Microhardness kgf/mm² 1600 1400 2300 1500 1200
Specific heat J/(kg·K) 800 400 700 700 730
Elastic modulus GPa 370 200 410 310 340
Tensile strength MPa 262 700 400 524 400
Compressive strength MPa 2600 1850 3900 2500 2070
Flexural strength MPa 380 690 550 780 360
Fracture toughness MPa·m½ 3.6 9.5 4.6 7.7 2.6
Poisson’s ratio 0.23 0.26 0.19 0.24 0.25
Melting point °C 2053 2700 2700 1900 2400

Values are reference figures from the original page, not guaranteed specifications. Properties vary by grade, processing, batch, test method and operating conditions. Use supplier specifications and inspection data for material selection and acceptance.

Discuss Your Silicon Carbide Component

Send SHENTIN your drawings, operating temperature, chemical exposure and loading conditions for a material and machining review.