- Machining Services
- Ceramic Products
- Materials
- Industries
- Our Strengths
- About SHENTIN
- Contact
Profession
Advanced technology and a dedicated team
Large glass substrates need rigid support and carefully finished contact surfaces. SHENTIN manufactures precision ceramic components for wet processing, vacuum chambers and inspection equipment, with grinding capabilities for parts over 1,000 mm long.
01 / WET PROCESSING & COATING
The challenge: Worn metal guides and polymer rollers can generate particles and increase the risk of glass scratches.
SHENTIN’s approach: Mirror-polished alumina guides with contact surfaces of Ra < 0.1 µm help reduce wear, particle generation and scratch risk in coating and developing equipment.
02 / DRY ETCHING & CVD
The challenge: Long supports can deflect under thermal and mechanical loads, affecting glass transfer alignment.
SHENTIN’s approach: Alumina or silicon carbide support beams over 1,000 mm long provide high stiffness for large glass substrates in process chambers.
03 / VACUUM HOLDING & INSPECTION
The challenge: Charge buildup during substrate release can create electrostatic discharge (ESD), putting thin-film transistors and panel circuits at risk.
SHENTIN’s approach: Selected static-dissipative ceramic grades help release accumulated charge while supporting vacuum holding.
| Capability | Application |
|---|---|
| Lengths over 1,000 mm | Precision grinding of large ceramic support beams and guide components for display equipment. |
| Ra < 0.1 µm | Polished alumina contact surfaces for glass transfer in wet processing and coating systems. |
| Material selection | Alumina, silicon carbide and static-dissipative ceramic options reviewed against temperature, loads and electrical requirements. |
Achievable dimensions, surface finish and deflection depend on material grade, geometry and operating conditions. ESD performance requires review of resistivity, grounding and equipment design.
Send SHENTIN your operating conditions, component drawing or details of a worn part. We will assess ceramic material and machining options for your proces。